Expansion, Reduction and
Notching non simultaneous
Notching non simultaneous
EVO, EVO IE (full electric) and EVO LITE
Hydraulic or FULL ELECTRIC machines with one, two or three independent heads that allow the expanding,
reducing and notching of straight or bent tubes,
utilizing rapid set-up tooling.
Hydraulic or FULL ELECTRIC machines with one, two or three independent heads that allow the expanding,
reducing and notching of straight or bent tubes,
utilizing rapid set-up tooling.
EVO R 300 V
The new vertical solution.
Compact machine for reducing medium and big diameters.
The new vertical solution.
Compact machine for reducing medium and big diameters.
Features and technical data
Model: EVO
• Supply voltage:
400V ± 10% 3 phases
• Net frequency: 50/60 Hz
• Maximum installed power: < 6 kW
• Auxiliary circuit voltage: 24V
• Min./Max. pipe diameter:
10 to Ø 100 mm
• Stainless steel tube thickness:
Max. 2.5 mm
• Cylinder stroke 100mm:
16 ton axial force
• Attachment tools: EVO Std.
• HMI: 10” touch
• Cylinder position check:
digital full control
• Supply voltage:
400V ± 10% 3 phases
• Net frequency: 50/60 Hz
• Maximum installed power: < 6 kW
• Auxiliary circuit voltage: 24V
• Min./Max. pipe diameter:
10 to Ø 100 mm
• Stainless steel tube thickness:
Max. 2.5 mm
• Cylinder stroke 100mm:
16 ton axial force
• Attachment tools: EVO Std.
• HMI: 10” touch
• Cylinder position check:
digital full control
Model: EVO IE (Full electric)
• Supply voltage:
400V ± 10% 3 phases
• Net frequency: 50/60 Hz
• Maximum installed power:
< 3 kW
• Auxiliary circuit voltage: 24V
• Min./Max. pipe diameter:
10 to Ø 100 mm
• Stainless steel tube thickness:
Max. 2.5 mm
• Cylinder stroke 100mm:
16 ton axial force
• Attachment tools: EVO Std.
• HMI: 10” touch
• Cylinder position check:
digital full control
• Supply voltage:
400V ± 10% 3 phases
• Net frequency: 50/60 Hz
• Maximum installed power:
< 3 kW
• Auxiliary circuit voltage: 24V
• Min./Max. pipe diameter:
10 to Ø 100 mm
• Stainless steel tube thickness:
Max. 2.5 mm
• Cylinder stroke 100mm:
16 ton axial force
• Attachment tools: EVO Std.
• HMI: 10” touch
• Cylinder position check:
digital full control
Model: EVO LITE
• Supply voltage:
220V ± 10% 1 phase
• Net frequency: 50/60 Hz
• Maximum installed power:
< 2 kW
• Auxiliary circuit voltage: 24V
• Min./Max. pipe diameter:
10 to Ø 100 mm
• Stainless steel tube thickness:
Max. 2.5 mm
• Cylinder stroke 100mm:
16 ton axial force
• Attachment tools: EVO Std.
• HMI: 4.3” touch
• Cylinder position check:
by limit switch
(end stroke configured
by manual position
switch)
• Supply voltage:
220V ± 10% 1 phase
• Net frequency: 50/60 Hz
• Maximum installed power:
< 2 kW
• Auxiliary circuit voltage: 24V
• Min./Max. pipe diameter:
10 to Ø 100 mm
• Stainless steel tube thickness:
Max. 2.5 mm
• Cylinder stroke 100mm:
16 ton axial force
• Attachment tools: EVO Std.
• HMI: 4.3” touch
• Cylinder position check:
by limit switch
(end stroke configured
by manual position
switch)
Model: EVO R 300 V
• Supply voltage:
400V ± 10% 3 phases
• Net frequency: 50/60 Hz
• Maximum installed power:
< 2 kW
• Auxiliary circuit voltage: 24V
• Min./Max. pipe diameter:
10 to Ø 300 mm
• Stainless steel tube thickness:
Max. 2.5 mm
• Cylinder stroke 100mm:
16 ton axial force
• Attachment tools: EVO Std.
• HMI: 4.3” touch
• Cylinder position check:
digital full control
• Supply voltage:
400V ± 10% 3 phases
• Net frequency: 50/60 Hz
• Maximum installed power:
< 2 kW
• Auxiliary circuit voltage: 24V
• Min./Max. pipe diameter:
10 to Ø 300 mm
• Stainless steel tube thickness:
Max. 2.5 mm
• Cylinder stroke 100mm:
16 ton axial force
• Attachment tools: EVO Std.
• HMI: 4.3” touch
• Cylinder position check:
digital full control
Energy
Saving
The inverter-controlled IE3 motor allows the machine to utilise its power with a focus on the energy-saving concept.
Industry 4.0 and
remote monitoring
Configuration for access to machine data
set useful for the company ERP.
Network parameters setting for integration in the customer’s corporate nework.
set useful for the company ERP.
Network parameters setting for integration in the customer’s corporate nework.
Tool
change
Quick changeover of the work kit installed on the machine. Maximum efficiency in the interchangeability of equipment too.
CNC control
The cycle is numerically controlled by a position transducer. The home and work dimensions, as well as the cycle modes, are set from the control panel on the operator side.
Customization
Our team of engineers is able to size machines and equipment according to specific customer requirements and has extensive experience in the field.
Reducing kit
Expading kit
New models
constantly
researched
and developed
by our
own team.
Switch on the evolution!
Contact us